24-Port 100Base-Fx Ethernet Switching Module (Ws-X6224-100Fx-Mt) - Cisco Catalyst 6500 Series Installation Manual

10/100 and 10/100/1000 Ethernet Switching Modules
Figure 1-8 48-Port 10/100BASE-T Ethernet Switching Module (WS-X6148-RJ45V)
WS-X6348-RJ-45V
STATUS
24-Port 100BASE-FX Ethernet Switching Module
(WS-X6224-100FX-MT)
Note
Figure 1-9

24-Port 100BASE-FX Ethernet Switching Module (WS-X6224-100FX-MT)

WS-X6224
1 2 3 4 5
24 PORT 100FX
Catalyst 6500 Series Switch Module Installation Guide
1-24
The QoS port architecture (Rx/Tx) for this module is 1q4t/2q2t.
48 PORT ETHERNET SWITCHING
10/100 BASE-T MODULE
The front panel LEDs are described in
The 24-port 100BASE-FX Etherent switching module (WS-X6224-100FX-MT)
provides 24 switched, 100-Mbps, full or half-duplex ports. (See
have MT-RJ optical connectors for connection to MMF optical cable.
This module is a Class 1 laser product. Refer to the Regulatory Compliance and
Safety Information for the Catalyst 6500 Series Switches for information on
working with lasers.
The QoS port architecture (Rx/Tx) for this module is 1q4t/2q2t.
6 7 8 9 10 11 12 13
100BASE-FX ports
The front panel LEDs are described in
Table 1-6 on page
14 15 16 17 18 19 20 21
Table 1-6 on page
Chapter 1 Product Overview
PHONE
1-47.
Figure 1-9.) Ports
22 23 24
1-47.
78-15725-02