16-Port 10/100/1000Base-T Gigabit Ethernet Switching Module (Ws-X6516-Ge-Tx); 4-Port 10 Gigabit Ethernet Switching Module (Ws-X6704-10Ge) - Cisco Catalyst 6500 Series Installation Manual

Gigabit Ethernet Switching Modules
Figure 1-32 16-Port Gigabit Ethernet Switching Module (WS-X6516A-GBIC)
WS-X6516-GBIC
1 3
2 4
16 PORT GIGABIT ETHERNET
1 2 3 4
16-Port 10/100/1000BASE-T Gigabit Ethernet Switching Module
(WS-X6516-GE-TX)
Figure 1-33 16-Port 10/100/1000BASE-T Gigabit Ethernet Switching Module (WS-X6516-GE-TX)
WS-X6516-GE-T X
1 2 3 4
16 PORT 1000 BASE-T GE

4-Port 10 Gigabit Ethernet Switching Module (WS-X6704-10GE)

Catalyst 6500 Series Switch Module Installation Guide
1-44
5 7 9
6 8 10
5 6 7 8
The front panel LEDs are described in
The 16-port Gigabit Ethernet switching module (WS-X6516-GE-TX) provides
16 switched, 10/100/1000BASE-T Gigabit Ethernet ports. (See
ports have RJ-45 connectors for Category 5 UTP. The WS-X6516-GE-TX module
has a single fabric channel interface. The switching module is upgradable to
support distributed forwarding by installing an optional Distributed Forwarding
Card (WS-F6K-DFC).
The QoS port architecture (Rx/Tx) for this module is 1p1q4t/1p2q2t.
5 6 7 8
The front panel LEDs are described in
The 4-port 10-Gigabit Ethernet switching module (WS-X6704-10GE) provides
4 switched, 10-Gigabit Ethernet ports. (See
hot-swappable 10GBASE-LR long-reach or 10GBASE-ER extended reach
XenPak optical transceivers. The WS-X6704-10GE module has dual fabric
channel interface and requires the Supervisor Engine 720.
The QoS port architecture (Rx/Tx) for this module is 1q8t/1p7q8t.
11 13
12 14
9 10 11 12 13 14
Table 1-6 on page
9 10 11 12 13
Table 1-6 on page
Figure
Chapter 1 Product Overview
15
16
15 16
1-47.
Figure
14 15 16
1-47.
1-34.) The four ports support
1-33.) The
78-15725-02