Fiber-Optic Connectors; Sc Connectors - Cisco Catalyst 6500 Series Installation Manual

Fiber-Optic Connectors

Fiber-Optic Connectors

SC Connectors

Warning
Catalyst 6500 Series Switch Module Installation Guide
B-14
Table B-8 Console Port Pinouts (Port Mode Switch Out) (continued)
Console Port
4 (GND)
5 (GND)
6 (TxD)
7 (DSR)
1
8 (CTS)
1. Pin 1 is connected internally to Pin 8.
This section describes the SC and MT-RJ fiber-optic connectors.
Invisible laser radiation may be emitted from disconnected fibers or
connectors. Do not stare into beams or view directly with optical instruments.
Statement 1051
The SC single-mode (fiber) connector is used to connect fiber-optic module ports
with the external network. (See
Figure B-6 SC Optical Connector
Appendix B Cable and Connector Specifications
Console Device
GND
GND
Output
Input
Input
Figure B-6.)
78-15725-02