48-Port 10/100/1000Base-T Fabric-Enabled Ethernet Switching Module (Ws-X6748-Ge-Tx) - Cisco Catalyst 6500 Series Installation Manual

Chapter 1 Product Overview
48-Port 10/100/1000BASE-T Fabric-Enabled Ethernet Switching
Module (WS-X6748-GE-TX)
Figure 1-23 48-Port 10/100/1000BASE-T Fabric-Enabled Ethernet Switching Module
(WS-X6748-GE-TX)
)
WS-X6748-GE-TX 48 PORT 10/100/1000 RJ-45
1
2
STATUS
78-15725-02
The 48-port 10/100/1000BASE-T switching module (WS-X6748-GE-TX)
provides 48 switched, 10/100/1000-Mbps, full- or half-duplex ports. (See
Figure 1-22.) Ports have RJ-45 connectors for Category 5, Category 5e, and
Category 6 cable. The WS-X6748-GE-TX module has 1.3-MB per-port packet
buffers and a dual-fabric channel interface. The switching module is upgradable
to support distributed forwarding with an optional Distributed Forwarding Card
(WS-F6K-DFC3).
The QoS port architecture (Rx/Tx) for this module is 1q8t/1p3q8t.
11 13 23 25
12 14 24 26
The front panel LEDs are described in
10/100 and 10/100/1000 Ethernet Switching Modules
35 37
36 38
SWITCHING MODULE
Table 1-6 on page
Catalyst 6500 Series Switch Module Installation Guide
47
48
1-47.
1-35