Drive System; Stapler - Canon Finisher-R1 Service Manual

4.2 Drive System

4.2.1 Stapler

4.2.1.1 Removing the Front
Cover
1) Remove screw [1] and remove the foot cover [2].
[1]
F-4-36
2) Open the front door [3] and remove three screws
[4].
3) Remove the front cover [5].
[3]
[5]
F-4-37
4.2.1.2 Removing the Stapler
1) Pull out the stapler, remove screw [1], and remove
the PCB cover [2].
0004-8065
2) Release the claw [3] and remove the PCB [4].
3) Disconnect three connectors [5].
4) Remove screw [6] and remove the stapler together
with the stapler base [7].
[2]
When removing, be careful not to damage the flag
[8].
[4]
5) Turn the stapler over, disconnect two connectors
[9], remove two screws [10], and remove the stapler
from the stapler base.
0004-4570
Chapter 4
F-4-38
F-4-39
4-11