Canon Finisher-R1 Service Manual page 63

[3]
F-3-25
4) In the case of the Finisher-R1, open the front door
[1] and remove the 3 screws [2], then detach the front
cover [3].
[1]
[2]
[3]
[2]
F-3-26
5) In the case of the Saddle Finisher-R2, open the front
cover [1].
[2]
[1]
[1]
6) Fix the fixing plate [1] (front) of the host machine
in place to the finisher [3] using a stepped screw [2]
(M4). (The figure shows a Finisher-R1.)
[3]
7) In the case of the Saddle Finisher-R2, close the
Chapter 3
F-3-27
[1]
F-3-28
[2]
3-11