Service Error Code; E500; E505; E514 - Canon Finisher-R1 Service Manual

6.3 Service Error Code

6.3.1 E500

Code
E500

6.3.2 E505

Code
E505

6.3.3 E514

Code
E514
T-6-6
Detail Error
Description
0001 Communication
error
T-6-7
Detail Error
Description
0001 Backup RAM
T-6-8
Detail Error
Description
0001 Rear end assist
motor(M39)/
Rear end assist
homeposition
0002
sensor (PI39)
Detection timing
The communication with the host machine
is interrupted.
Detection timing
The checksum for the finisher controller
PCB has an error when the power is turned
on.
Detection timing
The stapler does not leave the rear end
assist home position when the rear end
assist motorhas been driven for 3 seconds.
The stapler does not return to the rear end
assist home position when the rear end
assist motor has been driven for 3 seconds.
Chapter 6
0003-7593
0003-4671
0003-4680
6-5