2Processing Tray Paper Stacking Operation; Processing Tray Paper Stacking Operation; 3Offset Operation; Offset Operation - Canon Finisher-R1 Service Manual

Chapter 2
Motor
Swing motor (M36)
Rear end assist motor (M39)
Sensor
Swing guide HP sensor (PI35)
Aligning plate front HP sensor
(PI36)
Aligning plate rear HP sensor
(PI37)
Rear end assist HP sensor
(PI39)

2.3.2 Processing Tray Paper Stacking Operation

When the rear end of the paper exits the 1st delivery roller, the paper is delivered to the processing tray by the stack
delivery roller and return roller and then pushed against the processing tray stopper.

2.3.3 Offset Operation

Each sheet is pulled forward or backward using the front aligning plate and the rear aligning plate.
The offset operation is performed each time a sheet is pulled onto the processing tray.
2-8
Function
Moves the swing guide up/down
Aligns the stack end during stack ejection
T-2-2
Function
Detects the swing guide home position
Detects the aligning plate front home
position
Detects the aligning plate rear home
position
Detects the rear end assist home position
Stack ejection roller
1st delivery roller
Return roller
Processing tray stopper
F-2-9
0003-4553
0003-4554