Canon Finisher-R1 Service Manual page 58

Chapter 3
5) Remove the tape used on the outside of the finisher.
6) Remove the cushioning material [1] (Styrofoam) of
the tray.
7) Remove the fixing screw [1], and remove the 2 tray
fixings [2].
3-6
F-3-7
[1]
F-3-8
[2]
[1]
[2]
[1]
8) In the case of the Finisher-R1, open the front door
[1]. In the case of the Saddle Finisher-R2, open the
front cover [2].
<Finisher-R1>
[1]
F-3-10
<Saddle Finisher-R2>
F-3-9