Canon Finisher-R1 Service Manual page 114

[2]
[1]
F-4-136
4.3.6.3 Removing the Left
Upper Cover
1) Remove two screws [1].
2) With the upper door [2] open, remove the left upper
cover [3] by tilting to the right.
F-4-137
When replacing, hook the two claws [4] of the left
upper cover to the steel plate.
4.3.6.4 Removing the Grate-
shaped Upper Guide
1) Lower tray [1] below the grate-shaped upper guide
[2] (For how the tray is moved, see the steps under
0004-4659
"Removing the Tray 1.").
2) Remove five screws [3] and remove the grate-
shaped upper guide [2].
4.3.6.5 Removing the Tray 1
When you attach or remove the tray, please be sure
to raise the shutter [1], release the latch [3] on the
rear surface of the tray while the stack delivery gate
[2] of the delivery opening is lifted (covered), and
then move down the tray. If you move down the
tray without lifting the shutter of the delivery
Chapter 4
F-4-138
0004-4661
F-4-139
0004-4663
4-39