Canon Finisher-R1 Service Manual page 156

Chapter 5
3) Insert the cable B to J724 on the Finisher controller PCB.
4) Connect the RS-232C cable to the RS-232C connectors of the circuit board and the PC.
5) Turn on the power of the host machine.
The power LED on the circuit board is lit.
c. Download
The error code E713 might occur during download. It does not affect the download operation and its results.
1) Start up the Service Support Tool.
C:\ProgramFiles\Service Support Tool\bpchost.exe
2) Select [Downloading/Uploading].
F-5-14
3) Press the START/STOP key.
LOAD LED is lit.
4) Select the Finisher.
When the model name you selected is highlighted, press the Connect key.
5-23