E519; E530 - Canon Finisher-R1 Service Manual

Chapter 6

6.3.4 E519

Code
E519

6.3.5 E530

Code
E530
6-6
T-6-9
Detail Error
Description
0001 Gear change
motor(M40)/
Gear change
homeposition
sensor (PI49)
0002
T-6-10
Detail Error
Description
0001 Aligning plate
frontmotor
(M33)/
Aligning plate
fronthome
0002
position
sensor(PI36)
Detection timing
The stapler does not return to the gear
change home position when the gear
change motor has been drive for 387
pulses.
The stapler does not leave the gear
changehome position when the gear
change motorhas been drive for 387
pulses.
Detection timing
The aligning plate does not return to
aligning plate front home position sensor
when the alignment plate front motor has
been driven for 4 seconds.
The aligning plate does not leave the
aligningplate front home position sensor
when thealignment plate front motor has
been driven for 4 seconds.
0003-4681
0003-4672