Canon Finisher-R1 Service Manual page 59

[2]
F-3-11
9) Remove the tape and the cushioning material [1]
(Styrofoam) from the stapler.
[1]
F-3-12
10) In the case of the Finisher-R1, close the front door.
In the case of the Saddle Finisher-R2, go to the next
step while keeping the front cover open.
■ Removing the Stitcher Fixing Member (only for
the Saddle Finisher-R2)
1) Slide out the stitcher unit [1] to the front, and
remove the tape.
[1]
F-3-13
2) Remove the screw [1], and remove the stitcher
fixing member [2].
[2]
F-3-14
3) Put the stitcher back in and close the front cover.
■ Removing the Folding Roller Releasing Plate (only
for the Saddle Finisher-R2)
Memo: The releasing plate must be mounted to
prevent roller deformation, as otherwise
occurring when the machine is not used for a
long time. Once you have removed the plate
and its fixing screws, it is a good idea to store
them away for future use.
Chapter 3
[1]
3-7