Operating Notes For Port Security - HP E3800-24G-PoE+-2SFP+ Access Security Manual

HP Switch(config)# log security
Log Listing with
Keys:
Security Violation
Detected
----
W 09/07/11 01:18:15 FFI: port 2 - Security Viola-
tion
W 09/07/11 04:28:08 FFI: port 1 - Security Viola-
tion
----
Log Listing with No
Security Violation
Detected
HP Switch(config)# log security
Keys:
----
----
Figure 14-18.Example of Log Listing With and Without Detected Security Violations
W=Warning
M=Major
Event Log listing: Events Since Boot
Bottom of Log : Events Listed = 2
W=Warning
M=Major
Event Log listing: Events Since Boot
Bottom of Log : Events Listed = 2
From the Menu Interface: In the Main Menu, click on
Next page and Prev page to review the Event Log contents.
For More Event Log Information. See "Using the Event Log To Identify
Problem Sources" in the "Troubleshooting" chapter of the Management and
Configuration Guide for your switch.

Operating Notes for Port Security

Identifying the IP Address of an Intruder. The Intrusion Log lists
detected intruders by MAC address. If you are using HP E-PCM Plus to manage
your network, you can use the device properties page to link MAC addresses
to their corresponding IP addresses.
Proxy Web Servers. If you are using the WebAgent through a switch port
configured for Static port security, and your browser access is through a proxy
web server, then it is necessary to do the following:
■ Enter your PC or workstation MAC address in the port's Authorized
Addresses list.
Enter your PC or workstation's IP address in the switch's IP Authorized
■
Managers list. See "Using Authorized IP Managers" in the Management
and Configuration Guide for your switch.)
Configuring and Monitoring Port Security
I=Information
D=Debug E=Error
I=Information
D=Debug E=Error
Operating Notes for Port Security
Log Command
with
"security" for
Search String
----
----
----
----
4. Event Log and use
14-39