Table of Contents
Advertisement
Configuring Port-Based and User-Based Access Control (802.1X)
802.1X Open VLAN Mode
N o t e
13-46
5.
Test both the authorized and unauthorized access to your system to
ensure that the 802.1X authentication works properly on the ports you
have configured for port-access.
If you want to implement the optional port-security feature on the switch, you
should first ensure that the ports you have configured as 802.1X authenticators
operate as expected. Then refer to "Option For Authenticator Ports: Configure
Port-Security To Allow Only 802.1X-Authenticated Devices" on page 13-49.
After you complete steps 1 and 2, the configured ports are enabled for 802.1X
authentication (without VLAN operation), and you are ready to configure
VLAN Operation.
Hide quick links:
Advertisement
Table of Contents
