Table of Contents
Advertisement
HP Switch(config)# key-chain HP Switch2
Chain - HP Switch2
|
Key
|
Accept Start GMT Accept Stop GMT
---- + ----------------- ----------------- --------------
1
| 01/17/03 08:00:00 01/18/03 08:10:00 01/17/03 08:00:00 01/18/03 08:00:00
2
| 01/18/03 08:00:00 01/19/03 08:10:00 01/18/03 08:00:00 01/19/03 08:00:00
3
| 01/19/03 08:00:00 01/20/03 08:10:00 01/19/03 08:00:00 01/20/03 08:00:00
4
| 01/20/03 08:00:00 01/21/03 08:10:00 01/20/03 08:00:00 01/21/03 08:00:00
5
| 01/21/03 08:00:00 01/22/03 08:10:00 01/21/03 08:00:00 01/22/03 08:00:00
OSPF interface References
Interface
---------------------
OSPF Virtual Link References
Area/Virtual Link
------------------------------
Figure 16-4. Display of Time-Dependent Keys in the Key Chain Entry
You can use show key-chain to display the key status at the time the command
is issued. Using the information from the example configuration in figures
16-3 and 16-4, if you execute show key-chain at 8:05 on 01/19/03, the display
would appear as follows:
HP Switch(config)# show key-chain
Key Chains
Chain Name
-------------------
HP Switch1
HP Switch2
Figure 16-5. Status of Keys in Key Chain Entry "HP Switch2"
Configuring Key Chain Management
Send Start GMT
Keys
Active
Expired
------ -------
-------
1
1
0
5
2
1
Key Management System
Send Stop GMT
----------------
16-7
Hide quick links:
Advertisement
Table of Contents
