HP E3800-24G-PoE+-2SFP+ Access Security Manual page 236

RADIUS Authentication, Authorization, and Accounting
Configuring the Switch for RADIUS Authentication
HP Switch(config)# show authentication
Status and Counters - Authentication Information
Login Attempts : 2
Respect Privilege : Disabled
| Login
Access Task | Primary
----------- + ---------- ------------ ----------
Console | Local
Telnet | Radius
Port-Access | Local
Webui | Local
SSH | Radius
Web-Auth | ChapRadius radius
MAC-Auth | ChapRadius radius
| Enable
Access Task | Primary
----------- + ---------- ------------ ----------
Console | Local
Telnet | Radius
Webui | Local
SSH | Radius
HP Switch(config)# show radius
Status and Counters - General RADIUS Information
Deadtime(min) : 5
Timeout(secs) : 3
Retransmit Attempts : 2
Global Encryption Key : My-Global-Key-1099
Dynamic Authorization UDP Port : 3799
Server IP Addr
--------------- ---- ---- --- ------ -------------------------------- -----
10.33.18.127
10.33.18.119
10.33.18.151
Figure 6-7. Listings of Global RADIUS Parameters Configured In Figure 6-6
6-20
Figure 6-6. Example of Global Configuration Exercise for RADIUS Authentication
Login
Server Group Secondary
Enable
Server Group Secondary
Auth Acct DM/ Time
Port Port CoA Window Encryption Key
1812 1813 No 10
1812 1813 No 10
1812 1813 No 10
Login
None
None
Authorized
None
None
Authorized
None
Enable
None
None
None
None
source0127
After two attempts failing due to
username or password entry
errors, the switch will terminate
the session.
Global RADIUS parameters
from figure 6-6.
Server-specific encryption key
for the RADIUS server that will
not use the global encryption
key.
OOBM
No
No
These two servers will use the
global encryption key.