Displaying Acls - HP E3800-24G-PoE+-2SFP+ Access Security Manual

Action Command(s)
Enter or Remove a
Remark
Delete an Extended
ACL
Enable or Disable an
RACL
Enable or Disable a
VACL
Enable or Disable a
Static Port ACL
Displaying ACL Data
Displaying or Clearing
ACL Statistics
HP Switch(config)# ip access-list extended < name-str | 100-199 >
HP Switch(config-ext-nacl)# [ remark < remark-str > | no remark ]
For numbered, extended ACLs only, the following remark commands can be
substituted for the above:
HP Switch(config)# access-list < 100 - 199 > remark < remark-str >
HP Switch(config)# [no] access-list < 100 - 199 > remark
HP Switch(config)# no ip access-list extended < name-str | 100-199 >
For numbered, extended ACLs only, the following command can also be used:
HP Switch(config)# no access-list < 100 - 199 >
Command Summary for Enabling, Disabling, and

Displaying ACLs

HP Switch(config)# [no] vlan < vid > ip access-group < identifier > < in | out >
HP Switch(config)# [no] vlan < vid > ip access-group < identifier > < vlan >
HP Switch(config)# [no] interface < port-list | Trkx > access-group < identifier > in
HP Switch(eth-< port-list >| Trkx >)# [no] ip access-group < identifier > in
HP Switch(config)# show access-list
HP Switch(config)# show access-list < acl-identifier > [config]
HP Switch(config)# show access-list config
HP Switch(config)# show access-list ports < port-list | trkx >
HP Switch(config)# show access-list vlan < vid >
HP Switch(config)# show access-list radius
HP Switch# < show | clear > statistics aclv4 < acl-name-str > port < port # >
HP Switch# < show | clear > statistics aclv4 < acl-name-str > vlan < vid >
< in | out | vlan >
IPv4 Access Control Lists (ACLs)
Overview of Options for Applying IPv4 ACLs on the Switch
Page
10-92
10-95
10-85
10-81
10-97
10-118
10-7