HP E3800-24G-PoE+-2SFP+ Access Security Manual page 299

Switch software
Hide thumbs Also See for E3800-24G-PoE+-2SFP+:
Table of Contents

Advertisement

Notes
HP Switch(eth-10)# show port-access web-based clients 4 detail
Port Access Web-Based Client Status Detailed
Client Base Details :
Port
Session Status : authenticated
Username
IP
Access Policy Details :
COS Map
Untagged VLAN
Tagged VLANs
RADIUS-ACL List : No Radius ACL List
Shows the values assigned to the client's traffic for inbound CoS
(802.1p priority) and client's maximum inbound traffic volume.
Figure 7-1. Example Illustrating Results of Client Authentication on Port 4
RADIUS Server Configuration for CoS (802.1p Priority) and Rate-Limiting
Mixing CLI-configured and RADIUS-assigned rate-limiting on the same port
can produce unexpected results. Refer to "Per-Port Bandwidth Override" on
page 7-6.
Where multiple clients are currently authenticated on a given port where
outbound (egress) rate-limiting values have been assigned by a RADIUS
server, the port operates with the outbound rate-limit assigned by RADIUS for
the most recently authenticated client. Any earlier outbound rate-limit values
assigned on the same port for other authenticated client sessions that are still
active are superseded by the most recent RADIUS-assigned value. For exam-
ple, if client "X" is authenticated with an outbound rate-limit of 750 kbps, and
client "Y" later becomes authenticated with an outbound rate-limit of 500 kbps
while the session for client "X" is still active, then the port operates with an
outbound rate-limit of 500 kbps for both clients.
Assignment Method on Port 10
Statically Configured Values
RADIUS-assigned when client
"X" authenticates
*Combined rate-limit output for all clients active on the port.
: 4
: client-X
: n/a
: 33333333
: 10
: 20
Configuring RADIUS Server Support for Switch Services
802.1p
Inbound Rate-Limit
7
100,000 kbs
3
10,000 kbs
Indicates there is an authenticated
client session running on port 10.
Session Time(sec): 125
MAC Address
In Limit Kbps
Out Limit Kbps
Shows the RADIUS-assigned value on the
port for maximum outbound traffic volume.
Outbound Rate-Limit
100,000 kbs*
50,000 kbs*
: 0017a4-e6d787
: 10000
: 50000
7-9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents