HP E3800-24G-PoE+-2SFP+ Access Security Manual page 349

Syntax: [no] ip ssh
Enables or disables SSH on the switch.
[cipher <cipher-type>]
Specify a cipher type to use for connection.
Valid types are:
•
•
•
•
•
•
•
•
Default: All cipher types are available.
Use the no form of the command to disable a cipher type.
[filetransfer]
Enable/disable secure file transfer capability. SCP and SFTP
secure file transfer will not function unless SSH is also
enabled.
[ip-version <4|6|4or6>]
Select the IP mode to run in. The mode "ip-version 4" only
accepts connections from IPv4 clients. The mode "ip-version
6" only accepts connections from IPv6 clients. The mode "ip-
version 4or6" accepts connections from both IPv4 and IPv6
clients.
Default: ip-version 4or6
Configuring the Switch for SSH Operation
aes128-cbc
3des-cbc
aes192-cbc
aes256-cbc
rijndael-cbc@lysator.liu.se
aes128-ctr
aes192-ctr
aes256-ctr
Configuring Secure Shell (SSH)
8-17