Reset Button; Restoring The Factory Default Configuration - HP E3800-24G-PoE+-2SFP+ Access Security Manual

Reset Button

Pressing the Reset button alone for one second causes the switch to reboot.
Reset
Figure 2-8. Press and hold the Reset Button for One Second To Reboot the Switch

Restoring the Factory Default Configuration

You can also use the Reset button together with the Clear button (Reset+Clear)
to restore the factory default configuration for the switch. To do this:
1. Press and hold the Reset button.
Reset
2. While holding the Reset button, press and hold the Clear button.
Reset
3. Release the Reset button.
Configuring Username and Password Security
Clear
Clear
Clear
Front-Panel Security
2-25