HP E3800-24G-PoE+-2SFP+ Access Security Manual page 248

RADIUS Authentication, Authorization, and Accounting
Using SNMP To View and Configure Switch Authentication Features
HP Switch(config)# snmp-server mib hpswitchauthmib excluded
HP Switch(config)# show snmp-server
SNMP Communities
Community Name
-------------------- -------- ------------
public
test
Trap Receivers
Link-Change Traps Enabled on Ports [All] : All
Traps Category
_____________________________
SNMP Authentication
Password change
Login failures
Port-Security
Authorization Server Contact
DHCP-Snooping
Dynamic ARP Protection
Dynamic IP Lockdown
Address
---------------------- ---------------------- -------- ------ ------- ------
15.255.131.57
192.169.1.106
15.255.135.68
15.255.135.235
15.255.135.222
Excluded MIBs
hpSwitchAuthenticationMIB
Snmp Response Pdu Source-IP Information
Selection Policy
Trap Pdu Source-IP Information
Selection Policy
Figure 6-13. Disabling SNMP Access to the Authentication MIB and Displaying the Result
6-32
MIB View Write Access
Manager Unrestricted
Manager Unrestricted
Current Status
__________________
: Extended
: Enabled
: Enabled
: Enabled
: Enabled
: Enabled
: Enabled
: Enabled
Community
public
public
public
public
public
: rfc1517
: rfc1517
Indicates that SNMP security MIB
access is disabled, which is the
nondefault setting.
Events Type
None
None
None
None
None
This command disables
SNMP security MIB
access.
Retry Timeout
trap 3 15
trap 3 15
trap 3 15
trap 3 15
trap 3 15