HP E3800-24G-PoE+-2SFP+ Access Security Manual page 706

Key Management System
Configuring Key Chain Management
HP Switch(config)# key-chain HP Switch1 key1
HP Switch(config)# show key-chain HP Switch1
Chain - HP Switch1
|
Key | Accept Start GMT
---- + -----------------
1 | Bootup
OSPF interface References
Interface
---------------------
OSPF Virtual Link References
Area/Virtual Link
------------------------------
Figure 16-2. Example of Adding and Displaying a Time-Independent Key to a Key Chain Entry
16-4
[ accept-lifetime infinite ] [ send-lifetime infinite ]
show key-chain < chain_name >
For example, to generate a new time-independent key for the HP Switch1 key
chain entry:
Accept Stop GMT
---------------
Infinite
This option lets you specify the key value for the
protocol using the key. The < key_str > can be any
string of up to 14 characters in length.
accept-lifetime infinite: Allows packets with this key to
be accepted at any time from boot-up until the key
is removed.
send-lifetime infinite: Allows the switch to send this
key as authorization, from boot-up until the key is
removed.
Displays the detail information about the keys used
in the key chain named < chain_name >.
Send Start GMT
--------------
Bootup
Adds a new Time-Independent
key to the "HP Switch1" chain.
Displays keys in the key chain
entry.
Send Stop GMT
-------------
Infinite