HP E3800-24G-PoE+-2SFP+ Access Security Manual page 142

Web and MAC Authentication
Configuring Web Authentication
HP Switch (config)# show port-access web-based clients 1 detailed
Port Access Web-Based Client Status Detailed
Client Base Details :
Port
Session Status : authenticated
Username
IP
Access Policy Details :
COS Map
Untagged VLAN
Tagged VLANs
RADIUS-ACL List :
deny in udp from any to 10.2.8.233 CNT
Hit Count: 0
permit in udp from any to 10.2.8.233 CNT
Hit Count: 0
deny in tcp from any to 10.2.8.233 CNT
Hit Count: 0
permit in tcp from any to 10.2.8.233 CNT
Hit Count: 0
permit in tcp from any to 0.0.0.0/0 CNT
Hit Count: 0
Figure 4-10. Example of show port-access web-based clients detailed Command Output
4-28
Syntax: show port-access web-based clients <port-list> detailed
Displays detailed information on the status of web-
authenticated client sessions on specified switch ports.
Shows session status, name, and address for each web-
authenticated client on the switch. The IP address displayed
is taken from the DHCP binding table (learned through
DHCP snooping).The following can appear if the client's IP
address is not available:
n/a—DHCP snooping is not enabled on the switch; n/a is
displayed for a client's IP address.
n/a-IPv6—a web-authenticated client uses an IPv6 address.
n/a-no info—DHCP snooping is enabled but no MAC-to-IP
address binding for a client is found in the DHCP binding
table.
: 1
: webuser1
: n/a
: 11111111
: 4006
: 1, 3, 5, 6, 334, 2566
Session Time(sec) : 6
MAC Address
In Limit %
Out Limit %
: 0010b5-891a9e
: 98
: 100