Cabinet Trims Installation - Fisher & Paykel RS4621F Installation Manual

Install parts
Install the side trims
Note: Four (4) dual-lock strips are
pre-installed along each side trim.
Peel off the liners from the
1
dual-lock strips (A).
Cabinet side trim
assembly (2)
Dual-lock strip
(4)
Tools
Cross-head screwdriver
Cutter
Reveal dual-lock adhesive
Slide the trim behind the lower hinge (C),
3
then the top hinge (D). Hold the same angle
when sliding the trim.
@3

CABINET TRIMS INSTALLATION

D
C
Slide trim in behind lower hinge, then top hinge
Position the trim on the
2
throat with an angle (B).
A
F
Slot trim in behind top hinge pocket (E),
4
then press (F) adhesive to cavity ensuring
Slot trim in behind hinge pocket, then press adhesive to cavity
ensuring trim is also tight against fridge inner face.
trim is also tight against product inner face.
trim
B
door hinge
E
Note:
Press firmly on the dual-lock strip locations
● ●
to ensure the side trims are securely attached.
For dual installation, do the same steps for
● ●
each product.
trim
B
43