Fisher & Paykel RS4621F Installation Manual page 46

Dual install
Reinstall the top trim
joiner kit
Slide the top trim into hinge pocket of the cabinet (A),
1
and then engage the dual lock at the non-hinge side (B).
Centre trim
(1)
Dual-lock strip
(4)
44
@3
CABINET TRIMS INSTALLATION
A
B
Install the centre trims (for Dual install only)
Note: Four (4) dual-lock strips are pre-installed along the centre trim.
Peel off the liners from
1
the dual-lock strips (C).
3 Push and press the trim on the
products/throat (E).
Note: Make sure the top end of the
trim is pushed up against the alcove
ceiling before fixing the position.
E
Position the trim between the
2
throats of both cabinets (D).
C
D
4 Press the centre trim to fix
the position (F).
F