Covers And Trims Installation - Fisher & Paykel RS80A1 Installation Manual

Attach the covers
Internal box
Door / d rawer trim
install kit
Dual adhesive tabs
(12)
Top cover
(2)
Side cover
(4)
External box
Attach the door side trims
Door side trim
(2)
Drawer side trim
(2)
Drawer top trim
(1)

COVERS AND TRIMS INSTALLATION

A
Open the French doors.
Attach the top covers firmly over
the top studs, and the side covers
to the side brackets.
B
Install the side trims by inserting
into the panel gaps on each side of
the door(s).
Align the trim to the top of the
door and press evenly into the
panel gap until fully seated.
Attach the drawer top and side trims
Peel off two dual adhesive tabs
and press them together to
form a pair.
Remove the adhesive
z
backing on one side only.
Press firmly to the underside
of the drawer top trim in the
indicated locations.
Remove the remaining adhesive
backing from the dual adhesive
tabs.
Locate the trim against the back
surface of the panel and press down
firmly.
Ensure the trim is fully seated
z
against the drawer surface.
Install the side trims by inserting
into the panel gaps on each side of
the door(s).
Ensure the cabinet is centered
z
to prevent the side trims
from interfering with the cabinet.
39