Fisher & Paykel RS4621F Installation Manual page 40

IMPORTANT!
External box
Place the template on the back side of the door panel.
●●
Follow steps 1 – 2 if attaching a left hinge door panel, and steps
●●
3 – 4 if attaching a right hinge door panel.
Door panel template
(1)
Required tools
Cross-head screwdriver
Powered driver
(with 2mm drill bit)
38
@1
DOOR PANEL INSTALLATION (CUSTOM)
Using the installation template
(for right side of door panel)
1
Align the top of the
template with top edge
of top door panel.
2
Align right side edge of
template with right side
edge of door panel.
back side of front side of
door panel door panel
3
Mark drill locations of the screw
holes for the hanging bracket and
side brackets. Drill screw holes (2mm
diameter) to the marked locations.
4
Mark the reference
line for the bottom
3 and 4 holes.
5
Flip the template over and align
the right side edge of template
with right side edge of door panel.
6
Mark drill locations of the screw holes for
the side brackets. Drill screw holes (2mm
diameter) to the marked locations.