Fisher & Paykel RS4621F Installation Manual page 26

Install fasteners kit Installing depth alignment gauges
Note: The alignment gauges are only temporary and removable after installation.
Cabinet depth
alignment gauge
(4)
Tools
Cross-head screwdriver
Loosen the screws at the right and left,
1
top and bottom corners of the door (A).
Locate the alignment gauge to the
2
screws with the correct orientation (B).
24
!7
SINGLE INSTALLATION
A
B
Attach the alignment gauges so that the screw
3
head passes through the keyhole (C).
B
Lock the position of the alignment brackets
4
in the keyhole, and tighten the screws just
enough to firmly hold the gauges (D).
C
D