Fisher & Paykel RS4621F Installation Manual page 35

Dual install Fixing the second product inside the cabinetry
joiner kit
Fix the top caps of first and second products to the central spacer with the
1
top joiner fastener kit (A).
2 Fix the bottom joiner brackets of both products together with the bottom
joiner kit (B).
M5x20 Cap
– Place the plastic washers between the bottom joiner brackets before
screw (1)
M5x16x1 Plain washer
(1)
M6x16 Washer screw
(1)
M6x12x3.2 Plastic washer
(1)
M6 Hex nut
(1)
8Gx16 Countersunk screw
(5)
Tools
M4 Hex key
Cross-head screwdriver
fixing with the screw and nut. Tighten with M4 hex key.
A
Top joiner brackets
with central spacer
B
Bottom joiner brackets
Note: Image shows 762mm (second product) with 2 top brackets.
!8
DUAL INSTALLATION
C
A
B
Fix the top brackets (C) and bottom alcove side bracket (D) of the second
3
product to the cabinetry with 8Gx16 countersunk screws.
4 Do final alignment check. Ensure the feet of both products are positively
engaged with the floor.
C
C
D
Alcove side bracket
D
33