Fisher & Paykel RS4621F Installation Manual page 30

Install fasteners kit Installing depth alignment gauges
Note: The alignment gauges are only temporary and removable after installation.
Cabinet depth
alignment gauge
(4)
Tools
Cross-head screwdriver
Loosen the screws at the right and left, top and bottom
1
corners of the door (A).
Powered driver (optional)
2 Locate the alignment gauge
to the screws with the correct
orientation (B).
28
!8
A
B
DUAL INSTALLATION
B
C
Attach the alignment gauges so that the screw
3
head passes through the keyhole (C).
D
4 Lock the position of the alignment brackets in
the keyhole, and tighten the screws just enough
to firmly hold the gauges (D).