Fisher & Paykel RS4621F Installation Manual page 51

Hinge change Top hinge installation
assembly
Reinstall the hinge top bracket and bracket
1
spacer with M5x12 countersunk screws (A)
on the new hinge side at the other side of
the product.
Install the new hinge pocket and alcove top
2
bracket on the new hinge side using two (2x)
Hinge (right or left) top
M5x12 pan head screws (B).
pocket (1)
Note: The new hinge pocket and alcove top
bracket are supplied with the hinge kit.
Install the new hinge in the new hinge pocket
3
by screwing M5x12 pan head screws (2x) (C).
(Not applicable to RS46).
Open the hinge and reinstall the top hinge
Lower (right or left) hinge 4
bracket (1) pocket cover (D) to the top hinge pocket.
5 Install a new alcove top bracket on the new
non-hinge side. (Not applicable to RS46) (E).
Bottom hinge installation
K05 top (right or left)
adapter bracket (1)
Install a new lower hinge bracket on the new
6
hinge side with M6x16 screws (2x) (F).
– Ensure that the tab on the top of the
Top (fixed) grille
assembly
Use the hinge that was removed from the top of
7
the product and insert the tabs into the hinge
lower bracket. Rotate the hinge into place and
fix with M5x12 countersunk screws (2x) (G).
Open the hinge (H), and install the new top
8
Top (fixed) grille
(fixed) grille assembly.
(1)
9 Fasten in place with #8x16 screws (3x) (I).
One each at the bottom left and right of the
grille and one behind the water filter hatch.
Reinstall the bottom hinge pocket cover to
!0
the new hinge pocket (J).
@5
OPTIONAL — CHANGING OVER DOOR HINGES
bracket inserts into the slot in the plinth
front bracket.
H
J
G
I
I
F
I
E
D
C
A
B
E
49