Table of Contents
Advertisement
Trims install kit
Re-installing the top cover (for all models)
Remove the backing film of dual adhesive strips pre-attached to the top of the door. Ensure the magnet is in place before installing the top cover.
trim cap
Top door panel side
extrusion (2x)
1
Bottom drawer panel
side extrusion (2x)
magnet housing
Bottom drawer
top trim (1x)
Installing the door side covers
Refrigerator, freezer and wine cabinet
1
2
48
Illustrations may differ from your purchased appliance.
DOOR COVERS & TRIMS INSTALLATION
top cover
notch
Align the top cover to
the top of the door.
Clip the notch into the
magnet housing, and the
trim caps on top of the
trim cap
adhesive strips.
Insert door side covers into the
gaps on the right and left sides of
the drawer and slide downwards
to clip into place. Press firmly
to secure.
Ensure side cover is aligned with
the top door panel extrusion.
2
Refrigerator-freezer
1
2
3
Press down both ends of the top
cover to engage the trim caps on
the adhesive strips.
Ensure the magnet remains
in place and not damaged as
this will affect the operation of
the appliance.
Insert the drawer side covers into
the panel gaps on the right and
left sides of the drawer.
Ensure the cabinet is centered
to prevent the side covers from
interfering with the cabinet.
Align top trim to drawer and
press down firmly to secure
within panel bracket clips.
Ensure top trim is aligned with
the drawer side covers.
Advertisement
Table of Contents
