Appendix G Ne53 History - Emerson Micro Motion 2700 Configuration And Use Manual

Appendix G
NE53 History
G.1 Overview
This appendix documents the change history of the Model 2700 transmitter with PROFIBUS-PA
software.
G.2 Software change history
Table G-1 describes the change history of the transmitter software. Operating instructions are English
versions. Instructions in other languages have different part numbers but matching revision letters.
Table G-1 Transmitter software change history
Software
Date version Changes to software
09/2000 1.0 Initial release
08/2001 1.1 Software improvements
02/2002 2.0 Software improvements
Feature additions
08/2008 2.2 Software improvements
Feature additions
Configuration and Use Manual
Expanded the ability to control totalizers through multiple
communication protocols.
Improved the handling of RS-485 communication via the service port.
Improved the user experience with the display.
Expanded the ability to control totalizers through multiple
communication protocols.
Tightened data synchronization when accessing data via different
communication tools.
Enhanced volume flow functionality.
Added protections against low-power conditions.
Improved the user experience with the display.
Increased immunity to line noise.
Added drive gain as an Analog Input channel.
Added the ability to configure blocks without putting them in Out of
Service mode.
Added improved diagnostic reporting.
Added density cutoffs.
Operating
instructions
20000327 Rev. A
20000327 Rev. B
20000327 Rev. C
20000327 Rev. D
20000327 Rev. E
20000327 Rev. F
189