Operating manual XENOTEST ALPHA / ALPHA HIGH ENERGY
1.3
Safety instructions for the operator
•
The unit must be operated by instructed and authorised personnel only.
•
Overheating and damage of the unit and the samples may occur, when the filters are not inser-
ted. Always insert the filters!
•
Disconnect the unit from the mains, pull mains plug and secure against replugging, when fitting
the filter system, the lamp and the lantern as well as when carrying out care and cleaning work.
•
Lamps, specimens, specimen holders and sensors heat up considerably during the weathering
tests. Protective gloves must therefore be worn when removing them to prevent injury to your
hands. This applies in particular to high temperature tests.
•
When removing the lamp exhaust air hose while the unit is running UV radiation may emerge and
may cause irritation of the retina and the scin. Remove the lamp exhaust air hose only when the
unit is switched off.
•
Please observe the special safety hints in the text of the chapters "unit description", "start-up",
"function", "setting-up tests", "care and cleaning".
The unit complies with the safety standards of:
•
DIN VDE 0411 part 1 / 03.94
Measuring, Regulating, Controlling
Safety requirements for electric motor-operated measuring, regulating, controlling and
laboratory units.
•
DIN VDE 0711 part 1 / 09.91
Lamps
•
DIN VDE 0875 part 14 / 09.91
Limits and methods of measurement of radio disturbance characteristics of electric motor-
operated and thermal appliances for household and similar purposes, electric tools and similar
electric apparatus. (EN 55 014)
•
DIN VDE 0871 part 11/09.87
Limits of radio disturbance and measuring methods for industrial, scientific and medical high-
frequency apparatus (EN 55 011).
ALPHA and HIGH
Safety instructions
ENERGY features
Function
Program example
Page 10
Unit set-up
Unit description
Setting up tests
Care and cleaning
Options und accessory
Start-up
List of options and
Maintenance
accessories
ATLAS
Need help?
Do you have a question about the XENOTEST ALPHA and is the answer not in the manual?