Chrysler Stratus RHD 1999 Electronic Service Manual page 1220

JA
DISASSEMBLY AND ASSEMBLY (Continued)
Fig. 267 Tapered Snap Ring Instructions
Fig. 268 Snap Ring Installed
Fig. 269 Check Low/Reverse Clutch Clearance
Press down clutch pack with finger and zero dial
indicator. Low/Reverse clutch pack clearance is
0.89 to 1.04 (.035 to .042 inch).
Select the proper low/reverse reaction plate to
achieve specifications:
LOW/REVERSE REACTION PLATE CHART
PART NUMBER
4799846
4799847
4799848
4799849
4799855
Fig. 270 Install 2/4 Clutch Pack
NOTE: When installing the 2-4 clutch plates and
discs, the orientation should be alternated so the
pilot pads of adjacent plates do not align, refer to
(Fig. 271).
Fig. 271 Stagger 2/4 Clutch Plate Pads
TRANSAXLE 21 - 111
THICKNESS
5.88 mm (.232 in.)
6.14 mm (.242 in.)
6.40 mm (.252 in.)
6.66 mm (.262 in.)
6.92 mm (.273 in.)