Disassembly And Assembly - Chrysler Stratus RHD 1999 Electronic Service Manual

21 - 12 TRANSAXLE
REMOVAL AND INSTALLATION (Continued)
Fig. 37 Driveplate to Modular Clutch Bolts
Fig. 38 Lower Bellhousing Bolts
saxle with Mopar Type M.S.9417 Manual Transaxle
Fluid before lowering vehicle to floor.
(3) Verify that vehicle's back-up lights and speed-
ometer are functioning properly. Crossover cable
adjustment procedure is required after installing
transaxle in car to assure proper shifter adjustment.
Road test vehicle for proper transaxle function.

DISASSEMBLY AND ASSEMBLY

TRANSAXLE
The NV T350 (A-578) transaxle internal compo-
nents can be serviced only by separating the gear
case from the bellhousing case.
CAUTION: The transaxle output shaft is serviced as
a unit. No disassembly and reassembly is possible.
Damage to the transaxle may result.
DISASSEMBLY
(1) Place transaxle on bench.
(2) Remove shift levers. Remove transaxle case
half bolts (Fig. 39).
Fig. 39 Case Bolts
(3) Place two screwdrivers into the slots provided
in the case halves near the dowels (Fig. 40). Separate
the case halves (Fig. 41).
Fig. 40 Transaxle Case Halves
Fig. 41 Separate Case Halves
JA