JA
DISASSEMBLY AND ASSEMBLY (Continued)
Fig. 92 Split Thrust Washer Removal
Fig. 93 Split Thrust Washer Separation Pin
Fig. 94 4th Gear Removal
(12) Inspect the input shaft for worn or damaged
bearing races or chipped gear teeth. Replace as nec-
essary.
Fig. 95 Caged Needle Bearing Removal
Fig. 96 3-4 Synchronizer Hub Snap Ring
Fig. 97 3rd Gear Removal
ASSEMBLY
The snap rings that are used on the input shaft
are available in select fit sizes. Use the thickest snap
ring that fits in each snap ring groove.
TRANSAXLE
21 - 23