Table of Contents
Advertisement
Use
13
6.3.2 Adjusting the legrests
CAUTION
Exposed pinch points
Crushing, pinching due to incorrect handling
► Do not reach into the danger area with your fingers when folding the legrest or footplates up or down.
The legrests can be subsequently adjusted to the user's lower leg length.
14
15
6.4 Backrest
The backrest provides pressure redistribution and support for the upper body.
6.4.1 Folding the backrest up/down
The wheelchair may be delivered with the backrest folded down. It has to be folded up and secured prior to use.
20
Removing the legrests
1) Fold up the footplate.
2) Push the legrest locking mechanism back and
down (see fig. 13, item 1).
3) Swing out the legrest (see fig. 13, item 2).
4) Pull the legrest up and remove it (see fig. 13,
item 3).
Installing the legrests
1) Engage the legrest in the holder straight from above
(see fig. 13, item 3).
2) Push the legrest to the inside (see fig. 13, item 2)
until the locking mechanism engages (see fig. 13,
item 1).
3) Fold down the footplate.
Adjusting the lower leg length
1) If present: Remove the calf strap (not illustrated).
2) Loosen the set screw on the inside of the footplate
bar (see fig. 14, item 1).
3) Adjust the footplate bar to match the user's lower
leg length.
INFORMATION: Ensure that the footplate bar is
inserted into the swivel segment up to at least
the marking (= 50 mm).
4) Retighten the set screw on the footplate bar.
INFORMATION: Always adjust both legrests.
5) Hook the calf strap in again.
Adjusting the footplate angle
1) Loosen the Allen head screws on the footplate.
2) Turn the footplate to the desired angle.
3) Tighten the Allen head screws.
Juvo
Advertisement
Table of Contents
