Omron NX-SID Series User Manual page 315

The Prepare Value Dialog Box is displayed.
2
Select the Prepare a new value for the next write or force operation Option and enter the new
value.
Example: This example changes the value to 100.
3
Click the OK Button.
The Prepare Value Dialog Box closes and the value changes to a temporary value.
A light blue triangle is displayed at the lower left of the value. This indicates that a temporary
value is in effect.
To cancel the temporary value, click the present value of the desired variable again. Select the
Remove preparation with a value Option in the Prepare Value Dialog Box, and then click the OK
Button.
4
To check the temporary value, place the cursor over the value. The word Prepared is displayed
in the tooltip.
NX-series Safety Control Unit User's Manual (Z930)
8 Checking Operation and Actual Operation
The present value is displayed.
Enter the desired value here.
8
8 - 35