Omron NX-SID Series User Manual page 303

Description of Monitor Tab Page
• Communications Coupler Unit Displays
• NX Unit Displays
NX-series Safety Control Unit User's Manual (Z930)
Display
Enabled
Disabled
Disabled
Display
Enabled
Enabled
Disabled
8 Checking Operation and Actual Operation
Monitor
function
The Communications Coupler Unit is present in the
actual configuration and communications are
established with it.
The Communications Coupler Unit is disabled in
the EtherCAT network configuration.
Safety I/O Units connected to this Communications
Coupler Unit are not monitored.
Either the Communications Coupler Unit is not
present in the actual configuration or communica-
tions cannot be established with it.
Safety I/O Units connected to this Communications
Coupler Unit are not monitored.
Monitor
function
The Safety I/O Unit is present in the actual configu-
ration and communications are established with it.
This shows that there is no error at the safety I/O
terminals of the Safety I/O Unit.
The Safety I/O Unit is present in the actual configu-
ration and communications are established with it.
This shows that there is an error at a safety I/O ter-
minal of the Safety I/O Unit.
The Safety I/O Unit is present in the actual configu-
ration and safety process data communications are
disabled for it.
The Safety I/O Unit is not monitored.
Description
Description
8 - 23
8