Warning Message - Canon CX-G2400 User Manual

Chapter 4 Troubleshooting

Warning Message

Warning Message
XXXX ink low
("XXXX" is black, cyan, magenta, or
yellow)
Maintenance cartridge level low
Stopping XXXX ink level
detection
("XXXX" is black, cyan, magenta, or
yellow)
The print speed is not optimal
Temperature/humidity sensor
not connected
The battery for the clock has ran
out
Data transmission delayed
172
Warning Content
The remaining ink is low.
The maintenance cartridge is
running out of space and is about
to be full.
The ink level detection function is
disabled.
A fixed print speed is specified but
the print speed is not optimal.
The temperature/humidity sensor
needs to be replaced.
The clock's (RTC) battery needs to
be replaced.
Data generation processing on
the computer is not keeping up
with the printing speed set by the
printer driver.
Handling
Prepare a new ink tank.
Prepare a new maintenance
cartridge.
Set an ink tank that is compatible
with this printer.
Open the [Advanced Settings] tab
of the printer driver and check the
option [Automatic Speed] for [Print
Speed].
Set the print speed to something
slower than the current setting.
Take note of the message displayed
(#****) and contact your place of
purchase.
Take note of the message displayed
(#****) and contact your place of
purchase.
Printing will resume as the
processing progresses. Please wait a
moment.
If printing is being performed in 1st
Print Priority mode, printing starts
after ejecting a blank sheet