Setting Micro Margin Printing
Adjusting the Print Position
If the result of micro margin printing is off centered, adjust the print position.
1
Review the final print and check where it is off centered.
2
Open the printer driver setup window.
3
Adjust the print position.
1
2
3
(P.31)
1. Click the [Advanced Settings] tab.
2. Set the [Micro Margin Print Position
Adjustment] values.
[Vertical]
Set this when the printing is offset vertically.
The more negative the value, the more the
upward shift in the image. The more positive
the value, the more the downward shift.
[Horizontal]
Set this when the printing is offset horizontally.
The more negative the value, the more the
leftward shift. The more positive the value, the
more the rightward shift.
3. Click [OK].
Setting Micro Margin Printing
47