Turning On the Printer ...16 Connecting the Printer to Macintosh ...17 Printing ...19 With Mac OS 8.6 - 9.2 ...20 Selecting a Printer with the Chooser ...20 Starting ImageBrowser ...20 Selecting an Image for Printing ...21 Selecting a Layout Type ...22 Setting the Printer Driver for Printing ...24...
Page 3
Appendices ...52 About the Print Area and Pixels ...52 Print Area ...52 Number of Pixels ...54 Troubleshooting ...55 Error Messages ...56...
• While every effort has been made to ensure that the information contained in this guide is accurate and complete, no liability can be accepted for any errors or omissions. Canon reserves the right to change the specifications of the hardware and software described herein at any time without prior notice.
Read This First About the Manuals This user guide describes how to connect the printer to a Macintosh computer and print images. Provides printer handling notes, safety precautions, printer preparation, names of parts and other information necessary for operating the printer. Please read before CP-100 or CP-10 using the printer.
Printing Flow Diagram Follow the steps outlined below to prepare the printer and install the necessary software to enable printing. Prepare the printer. Insert paper cassette and ink cassette. CP-100 or CP-10 user guide. Install the necessary software. Install the printer driver and ImageBrowser into your Macintosh.
(Mac OS 8.6 - 9.2 ➡ p.24, Mac OS X ➡ p.40) in this user guide. About the Connection Cable To connect the printer to your Macintosh computer, you must use a USB cable. A USB cable is provided with the “Computer Connection Kit CCK-CP200”, but you can also purchase a USB cable separately as indicated below.
Place the Canon Digital Camera Solution Disk in the CD-ROM drive. With Mac OS 8.6 - 9.2, double-click the [Canon Digital Camera Installer] icon in the [Mac OS 8/9] folder on the CD-ROM. With Mac OS X, double-click the [Canon Digital Camera Installer] icon in the [Mac OS X] folder on the CD-ROM.
If the application folder contains any captured images, be careful to avoid discarding them along with the application itself. Uninstalling the USB Mounter Open Canon Digital Camera Solution Disk, the [Mac OS 8/9] folder, [Readme] folder, and [English] folder and read [ReadMe (Mounter)] file.
Place the Canon Digital Camera Solution Disk in the CD-ROM drive. With Mac OS 8.6 - 9.2, double-click the [Canon Digital Camera Installer] icon in the [Mac OS 8/9] folder on the CD-ROM. With Mac OS X, double-click the [Canon Digital Camera Installer] icon in the [Mac OS X] folder on the CD-ROM.
Page 11
Click the [Continue] button to automatically close any applications other than the installer. Follow the messages on the screen to proceed. When installation is completed, click the [Restart] button. Before the printer driver will operate, you must restart your computer.
Page 12
With Mac OS X Continuing from the above procedure, do the following: Turn the printer’s power on. (➡ p.16) After the Macintosh restarts, connect the printer to the Macintosh with the USB cable. For information on how to connect the printer, see Macintosh (➡...
Place the Canon Digital Camera Solution Disk in the CD-ROM drive. With Mac OS 8.6 - 9.2, double-click the [Canon Digital Camera Installer] icon in the [Mac OS 8/9] folder on the CD-ROM. With Mac OS X, double-click the [Canon Digital Camera Installer] icon in the [Mac OS X] folder on the CD-ROM.
Page 14
Select [Uninstall], and then click the [Uninstall] button. Click the [Continue] button to automatically close any applications other than the uninstaller. After uninstallation has been completed, click the [OK] button.
Page 15
Double-click the hard disk icon where Mac OS X is installed. Double-click the [Applications] folder. Double-click the [Utilities] folder. Double-click the [Print Center] icon. The Printer List window appears. Select the printer you uninstalled, and then click the [Delete] button. Close the window by clicking in the upper left-hand corner.
• To Turn the Printer Off With CP-100 :Press the ON/OFF button until the indicator light turns off. With CP-10 : Remove the printer’s power cable from the power outlet. • For more information about turning the printer on and off, see the CP-100 User Guide or CP-10 User Guide.
USB devices from your computer and then reconnect the printer. • Do not connect both a CP-100 and a CP-10, or two or more of the same type of printer to the same computer; otherwise the printers may not function properly.
Page 18
USB port on your computer. • There is no need to turn off the printer when connecting it to your computer. • When connecting the printer to your computer, make sure the connectors on the ends of the USB cable match the terminals on the printer and your computer.
This section describes how to use ImageBrowser to print images with the printer. ImageBrowser is an application included on the Canon Digital Camera Solution Disk. This application makes it easy to print. Before printing, verify that the printer is on (the indicator on the printer is green), and that the printer is properly connected to your computer with a USB cable.
Click printer in the [Destination] list, then close the Chooser dialog by clicking in the upper left-hand corner. Starting ImageBrowser Double-click the [Canon ImageBrowser] icon on the desktop. If the [Canon ImageBrowser] icon does not appear on the desktop, double-click the [Canon Utilities] folder, [ImageBrowser] folder, and [ImageBrowser] icon. [Chooser].
Select an image you want to print from the browser area. Click the (PRINT) button to display a menu. From the menu, select [Layout printing]. When CP-10 or CP-100 is selected, you cannot select [Index printing]. The Print window and Layout Options window appear. Print window You can check the layout of the image.
Printing Duplicate Images on an 8-Label Sheet or see Printing Different Images on an 8-Label Sheet Select “Photo printer standard printing” in the Layout Options window and then click the [Next] button. Click the [Page setup] button. Make [Paper Size] and [Orientation] selections, and then click the [OK] button.
Page 23
After returning to the Layout Options window, select “Bordered” or “Borderless”, then click the [OK] button. If you select “Bordered”, the image is automatically resized to fit within the print. The layout settings are reflected in the Print window. *The image shown is bordered. [LAYOUT OPTIONS] button Redisplays the Layout Options window, where you can change...
[Custom]. Direct Print mode adjustment Automatically adjusts image quality to the equivalent of Direct Print mode (the image quality used with the camera directly connected to the printer). Custom Click the [Adjust] button to adjust image quality freely.
Page 25
After selecting [Custom] and clicking the [Adjust] button, adjust the brightness and color of the print result, then click the [OK] button. For details, check the balloon help. Select [Background Printing] and select a printing method. Adjust the color of prints.
Page 26
Select [General], set the various options, and then click the [Print] button. Verify that the CP-100 or CP-10 is selected in [Printer]. For [Destination], you can select the following types of output. - Printer : Output is directed to the printer.
Page 27
Registering Profiles You can save [Color] and [Background Printing] settings as [Profile]. To register a Profile Make [Color] and [Background Printing] settings. Select [Add Profile]. In the Add Profile window, type in a name and a comment for the profile, and then click the [OK] button.
ImageBrowser allows you to print duplicate images. This makes it possible to print multiple copies of the same image on an 8-label sheet. In the Layout Options window, select “Photo printer multiple printing”, and then click the [Next] button. Click the [Page setup] button.
Page 29
After returning to the Layout Options window, click the [OK] button. Images are resized to fit the label dimensions and are displayed in the Print window. Click the image and select [Copy Image] on the ImageBrowser [Edit] menu. Enter 7 and click the [OK] button.
(PRINT) button to start printing. Printing Different Images on an 8-Label Sheet You can also print a combination of different images on an 8-label sheet. In the Layout Options window, select “Photo printer multiple printing”, and then click the [Next] button.
Page 31
Click the [Page setup] button. For [Paper Size], select [CP_C size(L)], select the orientation, and then click the [OK] button. After returning to the Layout Options window, click the [OK] button. From the browser area, drag and drop the images to be printed onto the Print window.
• You can print portions of images selected from any type of layout. • The length-to-width ratio cannot be modified if you select “Photo printer standard printing” in the Layout Options window, and then specify “Borderless”, or if you select “Photo printer multiple printing”.
Page 33
Select the portion of the image to be printed, then close the Clipping window. Clicking here changes the orientation of the trim frame. This button does not appear when “Bordered” is selected. One orientation or the other is selected by default when “Bordered” is not selected. The Clipping window closes and the selected area appears in the Print window.
Printing with Image Quality Correction ImageBrowser has a function that supports Exif 2.2 allowing you to automatically optimize print quality and print clearer, better- looking images. The image quality correction is adopted for all images printed from ImageBrowser. Click the image you want to print, and select [Preferences] from the ImageBrowser [Edit] menu.
Page 35
Exif 2.2 (referred to as Exif Print). This information can be passed on to the printer through ImageBrowser (Exif Print-compatible software) so that prints match the conditions at the time of capture more faithfully.
With Mac OS X Starting ImageBrowser Double-click the [Canon ImageBrowser] icon on the desktop. If the [Canon ImageBrowser] icon does not appear on the desktop, double-click the [Canon Utilities] folder, [ImageBrowser] folder, and [ImageBrowser] icon. Selecting an Image for Printing Select an image you want to print from the browser area.
Page 37
The Print window and Layout Options window appear. When [Print on Canon Card Photo Printer] is not displayed, install the CP-100 or CP-10 printer driver (➡ p.10). Print window You can check the layout of the image. Layout Options window...
Printing Duplicate Images on an 8-Label Sheet or see Printing Different Images on an 8-Label Sheet In the Layout Options window, turn on “Print on Canon Card Photo Printer”, select “Photo Printer Standard printing”, and then click the [Next] button.
Page 39
After returning to the Layout Options window, select “Bordered” or “Borderless”, then click the [OK] button. If you select “Bordered”, the image is automatically resized to fit within the print. The layout settings are reflected in the Print window. *The image shown is bordered. [LAYOUT OPTIONS] button Redisplays the Layout Options window, where you can change...
Setting the Printer Driver for Printing This section describes printing with modified printer driver settings. Click the (PRINT) button. In [Printer] select [CP-100] or [CP-10] Select [Color]. This pop-up menu contains various settings. (Do not change the [Layout] setting.)
Page 41
[Custom]. Direct Print mode adjustment Automatically adjusts image quality to the equivalent of Direct Print mode (the image quality used with the camera directly connected to the printer). Custom Click the [Adjust] button to adjust image quality freely.
Page 42
To use a registered setting, select [Custom]. Selecting [Save Custom Setting] allows you to save the current settings for [Copies& Pages], [Layout], [Output Options] and [Color].
Page 43
This is not a malfunction, but a mechanism for protecting the print head. If you interrupt printing while it is in progress, be sure to check the printer status. ➀...
ImageBrowser allows you to print duplicate images. This makes it possible to print multiple copies of the same image on an 8-label sheet. In the Layout Options window, turn on “Print on Canon Card Photo Printer”, select “Photo printer multiple printing”, and then click the [Next] button.
Page 45
For [Paper Size], select [CP_C size(L)], select the orientation, and then click the [OK] button. Images are resized to fit the label dimensions and are displayed in the Print window. After returning to the Layout Options window, click the [OK] button.
Printing Different Images on an 8-Label Sheet You can also print a combination of different images on an 8-label sheet. In the Layout Options window, turn on “Print on Canon Card Photo Printer”, select “Photo printer multiple printing”, and then click the...
Page 47
Click the [Page Setup] button. In [Format for] select [CP-100] or [CP-10]. For [Paper Size], select [CP_C size(L)], select the orientation, and then click the [OK] button. After returning to the Layout Options window, click the [OK] button. From the browser area, drag and drop the images to be printed onto the Print window.
• You can print portions of images selected from any type of layout. • The length-to-width ratio cannot be modified if you select “Photo printer standard printing” in the Layout Options window, and then specify “Borderless”, or if you select “Photo printer multiple printing”.
Page 49
Select the portion of the image to be printed, then close the Clipping window. Clicking here changes the orientation of the trim frame. This button does not appear when “Bordered” is selected. One orientation or the other is selected by default when “Bordered” is not selected. The Clipping window closes and the selected area appears in the Print window.
Printing with Image Quality Correction ImageBrowser has a function that supports Exif 2.2 allowing you to automatically optimize print quality and print clearer, better- looking images. The image quality correction is adopted for all images printed from ImageBrowser. Click the image you want to print, and select [Preferences] from the ImageBrowser [ImageBrowser] menu.
Page 51
Exif 2.2 (referred to as Exif Print). This information can be passed on to the printer through ImageBrowser (Exif Print-compatible software) so that prints match the conditions at the time of capture more faithfully.
Appendices About the Print Area and Pixels Print Area The shaded area ( ) in the following diagrams indicates the maximum printable area. Note that because the print area is larger than the actual paper size, a border is trimmed from the image when it is printed. (shown in millimeters) CP-100 L size sheet...
CP-10 Standard sheet/full-size label sheet Number of Pixels Printer Name Paper Type CP-100 Postcard size sheet L size sheet Credit card size sheet/ fullsize label sheet CP-10 Standard sheet / full-size label sheet * Number of pixels of print area. This also includes the border that is trimmed from around an image during printing.
Cause : A USB hub is being used for the connection. Correction : Be sure to use the USB cable to connect the printer directly to your computer. If you connect via a USB hub, the printer may not function properly.
• If the error does not go away after you have tried the recommended solutions, consult your nearest Canon Customer Support. • Use the information in this section in conjunction with the CP-100 User Guide or CP-10 User Guide.
Page 57
Cause : The paper cassette is not inserted correctly. Correction : Remove the paper cassette, and then insert it back into the printer correctly. Cause : Paper is not inserted correctly in the paper cassette.
Page 58
Cause : The printer’s battery charge is running low. The printer will not work. Correction : Use a new or fully charged battery pack, or use the printer with the AC adapter (compact adapter) connected.
Page 59
Paper is jammed inside the printer while printing, or there is paper still inside the printer before printing starts. Correction : After closing the dialog, turn the printer off and then back on again. Paper is automatically ejected from the print receptacle or the paper handling slot.
Page 60
Turn printer off and back on, then try printing again. Cause : The printer failed to initialize. Correction : Turn printer off and back on, then try printing again. Cause : There is too much paper in the paper cassette.