Canon CX-G2400 User Manual page 16

■ Changing the Sleep Timer/Off Timer Setting
If the printer is not operated for a predetermined amount of time, it can automatically switch to the sleep state (sleep
timer), or automatically turn off ( off timer).
IMPORTANT
• Administrative privileges over this printer are required to configure sprinter settings.
If a user without administrative privileges proceeds with configuration of settings, a message "You do not have
rights to printer management. Please contact your system administrator." appears.
For more details, see "Administrative privileges required for certain features
• When printing is in progress or an error has occurred, you cannot change the set time.
NOTE
• By default, the sleep timer is set to 4 minutes and the off timer is set to 240 minutes, (4 hours).
• For the off timer, set how much time must elapse after switching to sleep mode before the printer is turned off.
1
Make sure the printer is in the online state (the Status lamp is lit (green)).
If the printer is in the offline state (the Status lamp is off), press the Power key to switch the printer back to
the online state.
2
Open the Properties window of the printer driver.
Turning the Printer On/Off
(P.40)".
(P.32)
11