Error Message
Paper jam #****
Paper empty #****
Error Content
Paper is jammed.
Out of paper.
List of Error Messages/Warning Messages
Handling
Remove the paper jam and set the
paper again.
(P.159)
If out of paper, resupply with new
paper.
(P.13)
To cancel printing, click on [Cancel
Print Job] in the Status Monitor.
If the same error occurs, confirm the
following:
- Confirm that the paper switch
lever is set to the appropriate
position for the paper.
- Confirm that the paper set (size
and shape) matches the paper
(size and shape) configured by
the application software or printer
driver.
- There is a possibility that the
transport unit's sensor is dirty.
Clean the transport unit.
- Confirm the printer driver's
version and the firmware's
version. If the printer driver and
the firmware used are not the
latest version, download the latest
version from the website and
update.
Set new paper.
(P.13)
To cancel printing, click on [Cancel
Print Job] in the Status Monitor.
Confirm the paper so that the
further edge touches the back of
the feeder lift tray.
(P.13)
(P.130)
167