Configuring Network Using the Network Utility
The following explains how to configure the network using the network utility such as setting this printer's search
range and the network's time-out value
Setting the Range for Printer to be searched for
■
When searching for this printer, the IP address to be searched for can be specified.
1
From the [Environmental settings] menu, click [Utility environmental settings].
Or click
on the toolbar.
2
Specify the IP address to search for.
1
2
3
1. Check the option [Specify IP Address to
Search].
2. Enter the IP address.
3. Click [Add].
The IP address will be added. Up to 16 IP
addresses can be specified.
To remove an added IP addresses:
Select from the list and click [Delete].
Clicking [Restore default] will restore the content
of the [Search Range] tab to its defaults.
About Network Utility
199