Chapter 5 Appendix
When the following message appears, install the ink tank.
Check that [Shipping The Printer] is completed.
Turn off the printer.
• When the Power lamp is lit or blinking, do not remove the power plug from the outlet. A printer failure could
1. Open the ink tank cover.
2. Install all ink tanks.
Press on the top of the ink tank until the ink
Prior to installing each ink tank, verify the color
matches up with the color indicated on the
3. Close the ink tank cover.
Closing the ink tank cover will automatically
start bleeding ink.
Do not operate the printer until after the
message indicating that removal of ink is
1. Click [OK].