R-IN32M3 Series: Board design edition
18.
JTAG/Trace Pins
The following figures show examples when this LSI chip is connected to the ICE (in-circuit emulator).
They are examples when connected to the 20-pin half-pitch connecter or 20-pin full-pitch connecter of standard.
R-IN32M3
RESETZ
HOTRE SETZ
TRS TZ
JTA GSEL
HOTRE SETZ is i nco rporated
only in the R-IN32M3-CL.
Figure 18.1
Connection Example of JTAG Interface (20-Pin Half-Pitch without Trace)
As long as nRESET is input to RESETZ, nRESET is not required to input to HOTRESETZ.
RESETZ resets the entire LSI, but the internal PLL is not reset in the case of only HOTRESETZ. Please use it to meet
your needs.
In addition, nRESET should not be connected to PONRZ.
R18UZ0021EJ0400
Dec. 28, 2018
VDD33 (3.3 V)
About 4.7 kΩ to 10 kΩ
Wired OR con nectio n with
ope n d rain
Not conne cted
TCK
TMS
TDI
TDO
Reset circu it
ICE conne ctor (20-pin hal f-pitch)
nRESE T
TCK
TMS
TDI
TDO
18. JTAG/Trace Pins
Page 43 of 64