Reset Pins - Renesas R-IN32M3 Series User Manual

R-IN32M3 Series: Board design edition
2.3

Reset Pins

This is a list of reset pins of R-IN32M3.
As a width at low level of at least 100 ms is required for the reset input signals, secure this by applying the low level of
the reset signal over the oscillation stabilization time of the external oscillator (25 MHz).
In addition, de-assert the RESETZ and HOTRESETZ signals after de-asserting the PONRZ signal.
Pin Name
RESETZ Reset input
Note
HOTRESETZ Hot reset input
PONRZ Power-on reset input for built in RAM
TRSTZ JTAG reset signal
RSTOUTZ External reset output
Note. R-IN32M3-CL only
R18UZ0021EJ0400
Dec. 28, 2018
Feature
2. Power/Reset Pins
Connection Example
-
-
-
See section 16, CAN Pins.
-
Page 4 of 64